u.s. cage code 06324 ipt series bayonet lock connectors www.glenair.com e-mail: sales@glenair.com b-78 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. ipt 06 a...phm_ _emi67 straight plug connector with backshell for emi shield termination application notes 1. straight plug and backshell with phm cable clamp suitable for sheilded cables. rubber sleeves included to allow use of dif ferent diameter shielded cables. 2. connector class a (environmental ) CCno grommet supplied. note phm connector accessory provides environmental sealing to ip67. 3 . standard materials confguration consists of aluminum alloy with stainless steel coupling pins. 4. standard contact material consists of copper alloy with gold plating over nickel. 5. a broad range of other front and rear connector accessories are available. see our website and/or contact factory for complete information. 6. standard insert is high insulation synthetic rubber. ipt g 06 a 18-11 s z c phm18emi67 xx mil-c-26482 bayonet grounding finger (omit for standard) 06 - straight plug connector class a - non-environmental shell size and insert arrangement mod code options see table ii phm thread size see table i contact type c - crimp (omit for solder cup) alternate insert rotation (omit for normal) contact gender p - pin s - socket g c b
u.s. cage code 06324 ipt series bayonet lock connectors www.glenair.com e-mail: sales@glenair.com b-79 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. table i: dimensions shell size p.n. phm b min. - max. d max. g max l max. 8 7 2 - 7 15.0 19.05 75 10 9 2 - 9 21.0 21.80 75 12 11 2 - 11 24.0 26.20 85 14 11 2 - 11 24.0 29.40 85 16 11 2 - 11 24.0 32.55 85 18 11 / 18 2 - 11 / 9 - 16.5 42.0 35.35 100 20 18 9 - 16.5 42.0 38.90 100 22 18 9 - 16.5 42.0 42.10 100 24 18 / 22 / 24 9 - 16.5 / 15 - 20 / 19 - 24 42.0 45.10 100 table ii: modification codes shell finish (omit for standard cad/olive drab finish) assembly with accessories (omit for standard version) f2 - bright nickel plating (rohs) key polarization (omit for n version) w, x, y, z = alternates f6 - black electrodeposited paint (rohs) n0 - connector less backshell f7 - black zn-co plating (rohs) nxxx - custom designed connector f8 - olive drab zn-co plating ipt 06 a...phm_ _emi67 straight plug connector with backshell for emi shield termination standard finishes (for qq-a-591 aluminum shells) requirements iaw rohs not iaw rohs f2 electrolytic nickel f6 black non conductive f7 black conductive g3 cadmium with olive drab passivation f8 zinc cobalt with olive drab passivation thermal shock -40c + 100c -55c + 125c -55c + 125c -55c + 125c -40c + 100c salt spray after thermal shock 24 hour 500 hour 500 hour 500 hour 200 hour electical conductivity very good no very good very good good abrasion resistance very good very good good very good good
|
